04-15-2019 - Confined Space - Permit Entry - Decatur, IL

Why Should You Attend This Confined Space - Permit Entry training course?

Many workplaces contain spaces that are considered to be "confined" because their configurations hinder the activities of employees who must enter into, work in or exit from them. In many instances, employees who work in confined spaces also face increased risk of exposure to serious physical injury from hazards such as entrapment, engulfment and hazardous atmospheric conditions. Confinement itself may pose entrapment hazards and work in confined spaces may keep employees closer to hazards such as machinery components than they would be otherwise. For example, confinement, limited access and restricted airflow can result in hazardous conditions that would not normally arise in an open workplace.

This Confined Space - Permit Entry training course offers students topics such as: 

• Identifying permit-required confined spaces and their hazards
• The proper utilization of gas monitoring equipment
• Methods used to safely ventilate a confined space
• The duties of supervisors, entrants, and attendants
• Requirements for rescue services and personnel
• The steps necessary to temporarily reclassify a permit-required confined space to a non-permit space

By definition, a confined space:

• Is large enough for an employee to enter fully and perform assigned work;
• Is not designed for continuous occupancy by the employee; and
• Has a limited or restricted means of entry or exit.

These spaces may include underground vaults, tanks, storage bins, pits and diked areas, vessels, silos and other similar areas.

By definition, a permit-required confined space has one or more of these characteristics:

• Contains or has the potential to contain a hazardous atmosphere;
• Contains a material with the potential to engulf someone who enters the space;
• Has an internal configuration that might cause an entrant to be trapped or asphyxiated by inwardly converging walls or by a floor that slopes downward and tapers to a smaller cross section; and/or
• Contains any other recognized serious safety or health hazards.